Plastic Tubing
Hach Company Tubing, Tygon, R-3605, 4.8 mm (I.D.)
Chemical-resistant, Formula R-3603 Tygon tubing with flex strength greater than rubber. Unaffected by oxidizing agents and compatible with virtually any laboratory chemical. Bends readily to sharp radius curves and will maintain strong grip on glass or metal. Highly polished bore prevents interior build-up while facilitating cleaning.
AVANTOR MASTERFLEX (VWR LLC) C-Flex Animal-Derived Component Free (ADCF) 1/2 x 3/4"" Tubing, 50Ft
Characteristics: Exceptional tensile and tear strength, good biocompatibility, excellent chemical resistance, low gas permeability, and a smooth surface. Transparent. Certification: Resin meets USP and Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -50 to 275¿F (-45 to 135¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
Accuflow Systems Altafluor 350 THV Flex - has the flexibility of traditional PVC with chemical resistance to FEP - 350 THV 1/8" X 1/4"- 25 FT
Altafluor 350 THV FLEX (Tetrafluoroethylene-hexafluoropropylene. The preferred choice for UV light transmission. Good chemical resistance. Excellent bondability to other materials and has excellent ozone resistance, low permeation with superior weatherability.
Accuflow Systems Altafluor 480 UHP PFA - available in coiled hose and schedule 40 pipe - 480 UHPPFA 1/8" X 1/4"- 50 FT
Altafluor 480 UHP PFA (Ultra High Purity Perfluoroalkoxy) is the product of choice for applications involving extreme chemical resistance combined with high purity requirements. This tubing is made exclusively from high molecular weight 100% virgin high performance resins to resist stress cracking and provides excellent chemical resistance (even to common fluorosurfactants). It has low permeation and a smooth surface finish. Unlike standard HP PFA tubing products, this tubing has superior flex life values comparable to those of PTFE. FDA approved for food contact and in compliance with FDA regulation 21 CFR 177.1550. Meets requirements of USP Class VI, and is chemically inert to nearly all industrial chemicals and solvents, has higher thermal stability than FEP and is translucent in appearance. It is certified to NSF 51, NSF 61 AND NSF 372 and meets or exceeds SEMI F57 AND C-90 requirements for semiconducters. Altafluor 480 UHP PFA is compatible with flare or conventional fittings.
Accuflow Systems Altafluor 400 PFA - available in coiled hose and convoluted tubing constructions - 400 PFA 1/8" X 3/16"- 50 FT
Altafluor 400 PFA (Perfluoroalkoxy) is the product of choice for applications involveing extreme chemical resistance combined with high temperature. Altifluor 400 is made exclusively from 100% virgin grade high performance resin used to resist stress cracking. The highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Chemically inert to nearly all industrial chemicals and solvents. It has a higher thermal stability than FEP. is translucent in appearance. It is FDA compliant for food contact, FDA 21 CFR 177.1550. It meets the requirements of USP Class VI, is non-flammable and has a moisture absorption of nearly zero. Altafluor is compatible with flare of conventional fittings.
AVANTOR MASTERFLEX (VWR LLC) Dow Corning Pharma-50 Tubing, 1/8"" x 1/4"", 50 ft Pack
Applications: Pharmaceutical, biotechnology , and ultra-pure fluid processing. Characteristics: 50 durometer, translucent platinum-cured silicone tubing with a very low extractable profile; it contains no phthalates, plasticizers, latex, or other organic additives. Pharma tubing remains flexible and resilient for long service life. Dow Corning maintains complete traceability from silica to silicone tubing. Certifications: Elastomer exceeds test guidelines for USP Class VI Plastics, and the tubing itself is FDA compliant, and meets 3A Sanitary Standards and European Pharmacopoeia (EP) requirements. Produced under Bulk Pharmaceutical (BP) and current GMP principles. Temperature range: ¿60 to 460¿F (¿51 to 232¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
McMaster-Carr HI TEMP&HI-PUR SIL TUB, 10FT
High-Temperature & High-Purity Silicone Tubing Soft, 0.025" ID, 0.047" OD
Accuflow Systems Altafluor 100 PTFE (polytetrafluoroethylene) - 100 PTFE 10MM X 12MM - 25 FT
Altafluor 100 PTFE was the original TEFLON material developed by E.I.DUPONT CO. PTFE is the most flexiible of all fluoropolymers offered. It has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications. Non-flammable. Non-toxic. FDA compliant -21 CFR 177.1550. Very low permeability. Altafluor 100 is compatible with most standard fittings (not suitable for use with flare-type fittings). Applications include use in laboratories, chemical processes, analytical and process equipment, crogenic, electrical, high temp and automotive. Manufactured from 100% virgin grade PTFE resins, it is the most flexible, is chemically inert and resistant to nearly all industrial chemicals and solvents.
Accuflow Systems Altafluor 400 PFA - available in coiled hose and convoluted tubing constructions - 400 PFA 3/16" X 1/4" - 25 FT
Altafluor 400 PFA (Perfluoroalkoxy) is the product of choice for applications involveing extreme chemical resistance combined with high temperature. Altifluor 400 is made exclusively from 100% virgin grade high performance resin used to resist stress cracking. The highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Chemically inert to nearly all industrial chemicals and solvents. It has a higher thermal stability than FEP. is translucent in appearance. It is FDA compliant for food contact, FDA 21 CFR 177.1550. It meets the requirements of USP Class VI, is non-flammable and has a moisture absorption of nearly zero. Altafluor is compatible with flare of conventional fittings.
Perkin Elmer US LLC PFA Sample Uptake Tubing
12 cm of this PFA Sample Uptake Tubing is included in every NexION 1000/2000 Consumables Kit and both the NexION 300/350Q/X/D Consumables Kit (N8140513) and the NexION 300/350S Consumables Kit (N8140514).
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LFL 1.02MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-LFL, 1.02 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, Platinum-Cured Silicone, 1.42 mm ID; 50 ft
Use platinum-cured silicone tubing for high purity applications where outgassing of peroxide product is not allowed.
Norell Inc THIN- WALL TRANSPARENT FLUOROPOLYMER FEP TUBING, 3.52mm OD X 3mm ID, 12 in. LENGTH, PACKED IN LOTS OF 4
THIN- WALL TRANSPARENT FLUOROPOLYMER FEP TUBING, 3.52mm OD X 3mm ID, 12 in. LENGTH, PACKED IN LOTS OF 4